Facebook pixel
Diagnostics

Car Engine Diagnostic Test

Book in for a Car Diagnostics Fault Code Report at Kwik Fit Plus

If a warning light or fault code has appeared on your vehicle dashboard, Kwik Fit can help identify and trouble-shoot potential issues using our on-board diagnostics equipment, otherwise known as an OBD2 scanner. Diagnostic check services are available at most Kwik Fit centres but you can now book online at any of our Kwik Fit Plus centres nationwide where our trained staff are on hand to scan the fault codes being displayed on the OBD reader and provide help and advice to resolve any issues found.

To book and find your nearest Kwik Fit Plus centre, please enter your vehicle registration below and click 'Search'.


What is a diagnostics fault code check?

When a car warning light illuminates on your dashboard or an error message or code appears, a car diagnostics check or fault code check can help identify the problem before more serious damage occurs.

Most modern vehicles today contain a network of on-board computers known as Electronic Control Units (ECUs) which continually monitor the performance of the vehicle and can self-diagnose faults. Sensors all around the vehicle report back to the ECU if there are problems such as low fluid levels or increased engine temperature. When an issue is identified the ECU generates an error code. The relevant dashboard warning lights will then be displayed. These codes can be meaningless without the proper diagnostic code reader so we use an OBD scanner to read the codes and find out more specific information about the nature of the problem.

There are literally hundreds of potential OBD2 error codes that can only be read by specialist on-board diagnostic fault code readers. While a warning light may display on the dashboard alerting you to an issue, a diagnostics fault code check is required to start to understand the issue and determine if a more in-depth diagnostic session with a specialist technician is required.


Check Engine Light

If your check engine light is on itís important that a technician inspects your vehicle as soon as possible before further, more serious damage is caused to your car engine, especially if your check engine light is flashing as this usually indicates a serious problem or emergency.

As the most complex part of any vehicle, an engine fault could be caused by any number of factors. It could be something quite trivial like a loose fuel cap but it could be something much more serious like a faulty catalytic converter. In order to diagnose a check engine light fault, an OBD2 scanner must be used to find out where the issue lies. At Kwik Fit, we can read your check engine light fault codes using our Bosch OBD II diagnostic equipment to provide a full explanation of the issue. Our fully-trained technicians can then suggest any necessary repairs that may be required to get you back on the road and rectify the error so thereís no need to pay vehicle dealership prices to diagnose your check engine light issue. If the problem can be fixed this will reset the check engine light.

Check Engine Light


What does the Bosch car diagnostic equipment check for?

Our diagnostics scanners check for faults across a wide range of vehicle systems including engine management, tyres, emissions, lights and comfort controls. Live data displays multiple values from around the engine to ensure all components are working as expected when rectifying an issue.

The Bosch OBD II diagnostic equipment can also be used to reset service lights, test and adjust braking systems where an electronic handbrake is present, and adjust headlamp levels. For more information, contact your local Kwik Fit centre.


Diagnostic Fault Code Scan for your specific make and model of vehicle

Not sure what a specific BMW fault code means on your display? Has the check engine light come on in your Ford? No matter the manufacturer, by quickly plugging in our OBD2 fault code scanner to your ECU, we can read the fault codes displayed by all major vehicle makes and models including Vauxhall, Audi, Mercedes and Volkswagen to name a few. Our diagnostic technicians are on hand to explain and interpret the fault codes and give advice on any remedial work required to fix the problem before it becomes serious.


Please Note: Kwik Fit Plus offers a car diagnostics fault code read for £25 when you book online. Additional charges may apply in centre for extra items & services including, but not limited to, service light reset, clearing fault codes, and labour for in-depth diagnosis and fault repair. Your local centre will inform you of any additional charges before proceeding.

Exclusive Online Tyre Pricing

We are committed to offering customers our most competitive tyre prices. Read about our exclusive online tyre pricing.

Locate A Centre

Kwik Fit has over 600 centres across the UK including Northern Ireland, many of which are open 7 days a week for your convenience.

FAQs

We offer a series of FAQs to help you learn more about our services or your vehicle.

Customer Care

0800 75 76 77
You can reach our customer care team 7 days a week from 9:00am to 6:00pm on Monday and Thursday, 8:30am to 6:00pm Tuesday, Wednesday and Friday, 8:30am to 5:00pm Saturday, and 10:00am to 4:00pm on Sundays and Bank Holidays.